Skip to content
Unit plans

Bowling Unit for PE Class With Plastic Pins and a Planner

10 min readUpdated By Dennis Geckert, Co-owner
Cartoon: middle school students playing volleyball, badminton and basketball
Quick answer

How do you plan a bowling unit for PE class?

A bowling unit for PE class fits on one page: 12 planner fields, lanes of 3 to 4 students, plastic pins and soft balls rolled underhand. Copy the planner below and fill in grade band, lane count, scoring rule, role rotation and safety rules. A filled example for Grades 3–5 shows what each field looks like.

  • Lane size: 3 to 4 students, so everyone rolls or works every frame.
  • Pins: plastic pins, or empty 2-liter bottles with caps taped on.
  • Scoring: Grades 3–5 add pins down over 5 frames; Grades 6–12 use strikes and spares.
1 more point
  • Safety: nobody rolls until the pin setters stand outside the lane.

If you have a gym, plastic pins or bottles and a few soft balls, you can run bowling in PE class without long lines. You also get a lane sketch, a table of typical roll errors, role rotation for 3 to 4 students per lane, scoring rules by grade, two short games and an observation checklist.

On this page
  1. Quick answer
  2. What goes on a bowling unit planner?
  3. How do you set up bowling lanes in a gym?
  4. How do you teach the underhand roll step by step?
  5. How do students rotate so nobody waits?
  6. How do you score bowling for each grade?
  7. Which bowling games work in PE class?
  8. What belongs on an approach and release checklist?
  9. Frequently asked questions

What goes on a bowling unit planner?

A bowling unit planner has 12 fields, from grade band and lane count to safety rules and standards. The example column is filled in for Grades 3–5 with 24 students.

FieldYour entryExample
Grade band, class size________Grades 3–5, 24 students
Unit length________8 classes of 45 minutes
Space and floor________Full gym, dry floor, lanes across the width
Lanes and group size________6 lanes, 4 students per lane
Pins and balls________6 plastic pins and 1 soft ball per lane
Backstop________Folding mats zigzagged behind the pins
Skill focus________Underhand roll, low release
Scoring rule________5 frames of 2 rolls, add pins down, maximum 30
Roles and rotation________Foul-line pair rolls and scores, pin-end pair resets; pairs trade ends after each game
Safety rules________Roll only when pin setters are outside the lane; walk, never run
Assessment________Checklist with 4 cues, scorecard per lane
Standards________S1 and S3

For the standards row, use the 2024 SHAPE America National PE Standards: S1 motor skills, S2 movement and fitness concepts, S3 social skills and S4 personal skills. Rolling covers S1. Lane roles and honest scoring cover S3.

Cartoon: elementary students lift a rainbow play parachute with foam balls while their PE teacher watches

How do you set up bowling lanes in a gym?

Run each lane from a tape line to a triangle of pins, with folding mats as a backstop, and have every lane roll in the same direction. The sketch shows 6 lanes across a gym for the 24 students in the example.

Six gym lanes for 24 studentsSix gym lanes for 24 students. 1 Foul line (tape); 2 Roller spot, lane 1; 3 Roller spot, lane 2; 4 Roller spot, lane 3; 5 Roller spot, lane 4; 6 Roller spot, lane 5; 7 Roller spot, lane 6; 8 Pins, lane 1; 9 Pins, lane 2; 10 Pins, lane 3; 11 Pins, lane 4; 12 Pins, lane 5; 13 Pins, lane 6; 14 Backstop mats12345678910111213141Foul line (tape)2Roller spot, lane 13Roller spot, lane 24Roller spot, lane 35Roller spot, lane 46Roller spot, lane 57Roller spot, lane 68Pins, lane 19Pins, lane 210Pins, lane 311Pins, lane 412Pins, lane 513Pins, lane 614Backstop mats
  • Tape one foul line across all lanes and mark each roller spot with a cone.
  • Set pins in a triangle that points at the roller: 1, 2 and 3 pins from front to back for 6 pins, 1, 2, 3 and 4 pins for a full set of 10.
  • Start with a short lane and move the foul line back one step at a time as rolls get straighter.
  • Pick balls a student can cup in one hand, such as foam, soft rubber or light playground balls. Hard, heavy balls hurt when they rebound.
  • No pin sets? Use empty 2-liter bottles with the caps taped on. A little water keeps them upright until a ball hits. Check the caps for leaks before class so the floor stays dry.

Stand where you can see every roller spot and every pin end, and keep the floor dry. Open folding mats in a zigzag so they stand on their own, test that they stand firm before the first roll and keep students from climbing or leaning on them. If bowling shares the gym with other classes, the winter indoor PE units guide has ideas for a shared space.

How do you teach the underhand roll step by step?

Teach the underhand roll as 4 cues, first at a taped target or cone gate, then at one pin, then at a full triangle. Move on when 3 of 4 rolls stay on the target line.

  1. Stance: face the target, feet shoulder-width apart, eyes on the front pin.
  2. Step: step toward the target with the foot opposite the rolling hand while the arm swings back.
  3. Release: swing the arm forward beside the leg and let go of the ball close to the floor, knees bent.
  4. Follow-through: finish with the rolling arm pointing at the target and hold it until the ball stops.

Typical errors

ErrorCauseFix
Ball bounces or skipsStanding upright, letting go above the kneeBend the knees and release close to the floor
Ball veers into the next laneArm swings across the body or the wrist twistsSwing beside the leg and point at the front pin at the finish
Ball is too slow to move a pinNo step, short backswingStep with the opposite foot and swing the arm back farther, or move the foul line closer

How do students rotate so nobody waits?

Put 4 students on each lane as 2 pairs, one pair at the foul line and one at the pins, and let the foul-line partners swap jobs after every frame. A frame is 2 rolls.

  1. The roller rolls while the scorer stands behind the foul line with the scorecard. Pin setters wait outside the lane until the ball stops.
  2. A pin setter counts the fallen pins out loud and the scorer writes the number. The setters clear the fallen pins, one setter carries the ball back along the side of the lane, and both step out.
  3. The roller takes a second roll at the pins still standing. If all pins fell on the first roll, the frame ends.
  4. The setters count again, stand all pins up, bring the ball back and step out. Roller and scorer swap places, and the next frame starts.

Nobody rolls until both pin setters stand outside the lane and the ball is back at the foul line. After each foul-line partner has rolled 5 frames, the pairs trade ends for a second game. With 3 students per lane, one sets pins and returns the ball while two alternate rolling and scoring; rotate the pin job after each game.

Bowling has standing time built in. SHAPE America recommends 50 percent of PE class time in moderate to vigorous activity, so keep pin setters moving and start with a brisk warm-up. A team generator can split lane groups at random or balanced by skill.

How do you score bowling for each grade?

Count pins down in Grades K–2, add pins over 5 frames in Grades 3–5 and use strike and spare scoring in Grades 6–12. Treat the bands as starting points and pick the rule your class can add quickly.

GradesScoring ruleMaximum
K–2One roll per turn, count the pins downNumber of pins (6 in the example)
3–55 frames of 2 rolls, add pins down; all pins down ends the frame30 with 6 pins
6–1210 frames of up to 2 rolls; strike = 10 plus the next 2 rolls; spare = 10 plus the next roll; a strike or spare in frame 10 earns bonus rolls300 with 10 pins

A 10-pin scorecard after 4 frames looks like this:

  • Frame 1: 9 and 0 = 9. Total 9.
  • Frame 2: 7 and 3 is a spare, so it adds the next roll. That roll is the strike in Frame 3 (10), so Frame 2 = 10 + 10 = 20. Total 29.
  • Frame 3 is a strike, so it adds the next two rolls, 6 and 3: 10 + 6 + 3 = 19. Total 48.
  • Frame 4: 6 and 3 = 9. Total 57.

For a match between two lanes, a scoreboard and game counter keeps both totals visible.

Which bowling games work in PE class?

Spare Hunt and Frame Race are two short games that work with 3 to 4 students per lane, and a lane cup adds a contest across lanes. A miss never earns push-ups or laps, because SHAPE America's position statement calls exercise as punishment inappropriate.

Spare Hunt for pairs

This game trains the second roll. The pin setter stands 3 pins in a gap pattern, for example one at the front and two spread at the back. The roller gets 2 rolls: all 3 pins down on the first roll score 2 points, all 3 down by the second roll score 1 point, anything else 0. A ball that leaves the floor scores 0 for that roll, with no re-roll. Partners swap after each setup. The game ends after 5 setups each, and the higher total wins. Tied totals get one extra setup each.

Frame Race for lane teams

Each lane is a team, and the goal is the highest lane total. The scorer adds all pins down. A ball that leaves the floor counts 0 for that roll. One race is both pair games on the lane, and the lane total is the sum of all 4 students. Tied lanes pick one roller each for a single tiebreaker frame.

Lane cup

Add each lane's totals over 3 Frame Races. The highest sum wins, and ties go to the lane with more strikes (all pins down on the first roll). For head-to-head matches, see how to run a round-robin tournament in one class period.

What belongs on an approach and release checklist?

Check 4 cues per student: stance, step, release and follow-through. Mark a check when the cue shows on at least 3 of 4 rolls, and add a note for the next practice.

StudentStanceStepReleaseFollow-throughNotes
Student A✓✓Not yet✓Knees straight at release; cue: touch the floor
Student B✓Not yet✓✓Steps with the same foot; practice 3 steps without a ball
________

Watch from the side to see the step and the swing, and from behind the roller to see whether the follow-through points at the target.

Frequently asked questions

How many pins and balls does a class of 24 need?

For 6 lanes, plan 6 balls and 36 pins at 6 pins per lane, or 60 pins if every lane gets a full set of 10. Mix school pin sets with 2-liter bottles to reach the count. Each lane needs only one ball because the ball returner carries it back.

How do I keep a mixed-ability class in the same game?

Tape a near and a far foul line on every lane and let each student pick before each frame. The scoring rule stays the same for everyone, so compare each student with their own last total, not with a classmate who rolls from another line. Balance the lane groups by skill so team scores stay close.

How long should a bowling unit last?

About 8 classes of 45 minutes, as in the planner example, covers target rolls, pins, scoring and a lane cup. With fewer classes, skip the cup and keep the scoring to counting pins down.

Can I teach bowling without plastic pins?

Yes. Empty 2-liter bottles with taped caps, light cones or cardboard tubes all work as targets. Bottles with a little water stay up until hit. Cones and tubes need more ball speed, so start with a short lane. Use soft balls and a dry floor in every case.

Run your bowling rotations and scores from the app

Try the 3 free units without an account. The download is free for iOS & Android. For the Countdown Timer and the Scoreboard & Game Counter on the gym floor, see current prices in the app.

App for iPhone, iPad and Android.

Kid cheering with a ball in hand