Skip to content
Unit plans

PE Unit Plan Template and How to Fill It In

10 min readUpdated By David, Co-owner
Cartoon: PE teacher holding a tablet gives a thumbs up while three students cheer and dribble a basketball between cones
Quick answer

What goes into a PE unit plan template?

A PE unit plan template needs 12 fields and fits on one page. Fill in the outcomes and the final checks first, then build the skill progression backward from them. Every outcome gets its own final check, written before the first lesson. Keep warm-up details, cues, and daily organization in the lesson plans.

  • 12 fields on one page, from title and standards to reflection.
  • A common setup: one psychomotor, one cognitive, one affective outcome.
  • Each outcome gets its own final check, written before the unit starts.
1 more point
  • 2024 SHAPE America standards run S1–S4; many forms still use S1–S5.

This guide is for PE specialists, classroom teachers who teach PE, and student teachers who need a unit plan on paper. It gives you a 12-field table to copy and a filled-in example for Grades 3–4. After that come the progression, assessment, and safety rows in detail, plus the mistakes that make a unit plan hard to teach from.

On this page
  1. Quick answer
  2. The 12 fields to copy, row by row
  3. What does a filled-in unit plan look like?
  4. How do you build the skill progression?
  5. How do you plan the assessments before the unit starts?
  6. What goes in the equipment and safety rows?
  7. How do you adapt the template for mixed-ability classes and IEPs?
  8. Which mistakes make a unit plan unusable?
  9. Frequently asked questions

The 12 fields to copy, row by row

A PE unit plan needs 12 fields on one page, covering everything that stays the same from the first class to the last. Daily details such as warm-up, grouping, and cues belong in the lesson plans, and the order of units across the year belongs on a yearly map. See the PE lesson plan template, field by field and the yearly K–5 curriculum map template for those two levels.

Copy the table into a document and replace the right column with your own entries.

FieldWhat to write
Unit title and grade spanTheme or sport plus the grades
LengthNumber of lessons, minutes per class period, start and end dates
Space and class sizeGym, field, or classroom, and your largest class in it
StandardsSHAPE America standards (2024 edition: S1–S4) and your state codes
OutcomesThree “Students will…” sentences: one psychomotor, one cognitive, one affective, each measurable
Skill progressionFour stages from first contact to game play, one focus line each
AssessmentA pre-check, ongoing checks, and one final check per outcome, with scale and timing
EquipmentItem, quantity for the full class, who sets it up
SafetyEach rule with the condition it depends on: spacing, surface, equipment, supervision
DifferentiationChanges to distance, size, speed, rules, or roles, plus listed accommodations
VocabularyAbout five to eight terms students should use by the end
ReflectionTwo lines after the unit: what to keep, what to change
Cartoon: elementary students in the gym, one kneeling on a scooter board, one throwing a ball overhand, one hopping toward a hoop

What does a filled-in unit plan look like?

A filled-in unit plan reads like the table below, here for an eight-lesson throwing and catching unit in Grades 3–4. Every entry is an example to adapt to your own class, space, and standards.

FieldExample entry
Unit title and grade spanThrowing and Catching Games, Grades 3–4
Length8 lessons of 40 minutes, two classes a week for 4 weeks
Space and class sizeGym, 28 students
StandardsSHAPE America 2024: S1 (motor skills), S2 (movement concepts), S3 (social skills), plus state codes
OutcomesPsychomotor: throw overhand across a marked lane and catch with two hands in 4 of 5 attempts. Cognitive: name three throwing cues (step, turn, follow through). Affective: stay in your lane and give your partner one cue after each round.
Skill progressionExplore, Build, Apply, Show
AssessmentPre-check in the first class; cue checklist during Build and Apply; final checks: throwing test, exit ticket on the cues, lane tally in the last game
Equipment14 soft foam balls (one per pair), 7 hoops as targets, cones for lanes
SafetySoft balls only, one throwing direction on one signal, no throws at heads, dry floor
DifferentiationCloser or farther lane, smaller or larger target, lighter ball or scarf, partner roles
Vocabularyoverhand, follow through, target, lane, open space
ReflectionWritten after the last class

The standards row uses the wording of SHAPE America’s 2024 National PE Standards: S1 is “Develops a variety of motor skills,” S2 is “Applies knowledge related to movement and fitness concepts,” and S3 is “Develops social skills through movement.” The 2024 edition has four standards and replaced the 2013 edition with five, and the codes differ between them, so write the wording next to each code.

How do you build the skill progression?

Build the progression in four stages, from first contact with the skill to use in a game, with one focus line per stage. The names below are one workable choice, shown for the throwing and catching example.

  • Explore: students try the skill with soft equipment and no scoring. Focus: throw to a partner, catch with two hands.
  • Build: add one demand at a time, such as more distance or a moving partner. Focus: step toward the target and follow through.
  • Apply: use the skill in a small-sided game with one or two simple rules. Focus: choose an open partner.
  • Show: run the final checks and observe a game without coaching during play. Focus: the cues without reminders.

Change one variable per step: distance, target size, speed, or number of defenders. If two change at once, you cannot tell which one made the task too hard.

Check waiting time as well. SHAPE America recommends moderate-to-vigorous activity for 50 percent of class time (cited in its dodgeball position statement). A stage where six students share one ball misses that target, so give every pair a ball. For sport-specific progressions, see the basketball unit plan, the badminton unit plan for Grades 6–12, the jump rope skills ladder, and the gymnastics lesson plan template. To hold your progression next to a finished one, open the 3 free units, which need no account.

How do you plan the assessments before the unit starts?

Write each final check right after its outcome and before you plan any stage, so every outcome has a matching check. This is backward design: the progression aims at something you can observe from the first lesson on.

  • Pre-check, first class: watch each student do the skill once without coaching. Note who needs a shorter distance and who is ready for a longer one.
  • Ongoing check, Build and Apply: a short checklist of two or three cues per skill, marked while students practice.
  • Final check, Show: the same task as the pre-check, so growth is visible, plus a game observation.

Use a four-level scale, for example beginning, developing, proficient, and advanced. A student who moves from beginning to developing shows progress even when the neighbor started at proficient.

The cognitive and affective outcomes need final checks too. A two-question exit ticket on the cues covers the cognitive outcome, and a tally of how often pairs stayed in their lanes covers the affective one. For more methods, see quick ways to assess PE class, and for the standards side, aligning lessons with the SHAPE America standards.

What goes in the equipment and safety rows?

The equipment row lists each item with the quantity for your largest class and who sets it up. For 28 students working in pairs you need 14 foam balls, and groups of four at hoop targets need 7 hoops.

The safety row states each rule with the condition it depends on, because a rule without a condition gets ignored or overapplied:

  • Soft foam balls only for throws between students, no throws at heads, and a stop signal everyone knows.
  • All students throw in the same direction on one signal and fetch balls on a second signal, with lanes wide enough that two students with outstretched arms cannot touch the next pair.
  • Floor dry and walls clear before class. If the floor is wet, move to another space or switch the activity.
  • One adult supervises the whole space, and students stay out of the equipment room.

Supervision, space, and student age change what is appropriate, so adjust these rules to your group, your gym, and your school’s policy.

How do you adapt the template for mixed-ability classes and IEPs?

Fill the differentiation row with specific changes to distance, size, speed, rules, or roles, written before the unit starts so you are not improvising in front of 28 students. Give every task an easier and a harder version, and let students choose or assign them yourself.

  • Distance: a lane that is closer or farther.
  • Size: a larger or smaller target.
  • Speed: a scarf or a lighter ball for students who need more time to track the object.
  • Roles: thrower, catcher, and a partner who holds the cue card.

To form groups for these tasks, the Team Creator in PhysEdPrep’s app builds teams at random, balanced by skill, or split by gender from your saved class rosters.

An IEP or 504 plan is written by the student’s team, and the accommodations it lists for PE are carried out in your class. Read them before the unit starts, add the ones that affect your activities to the differentiation row or to your private notes, and ask the special education case manager when an accommodation is unclear for your space. For students with an IEP, federal rule 34 CFR 300.108 calls for PE adapted as needed, in the regular PE program unless the IEP specifies specially designed instruction. This is general information, not advice for an individual student.

Which mistakes make a unit plan unusable?

These six mistakes make a unit plan hard to teach from, and each has a quick fix.

MistakeCauseFix
Outcomes say “understand” or “enjoy”No observable action in the wordingStart with a verb you can see and add a condition, such as “in 4 of 5 attempts”
The plan runs past one pageLesson details were copied inMove warm-ups, cues, and groupings to the lesson plans
Assessments are added after the unit is builtThe plan was written activity by activityWrite each final check right after its outcome
Students stall in the middle stagesDistance, target, and speed all change at onceChange one variable per step
Safety rules without conditionsRules were copied from a general listAdd when and where each rule applies, such as “soft balls only for throws between students”
Differentiation says “modify as needed”No time during planningName the actual change, such as lane distance or target size

Frequently asked questions

Is there a PE unit plan template in PDF or Word?

No, there is no ready-made file on this page, but the table turns into one in a few minutes. Copy the 12-field table into Word or Google Docs, replace the right column with your entries, and export a PDF when you need to share it. Keep the plan to one page and attach rubrics or checklists as separate sheets.

How many lessons should a PE unit have?

About 6 to 10 lessons is a workable range for a single skill theme, and the example above uses 8 lessons over 4 weeks. Count your classes per week first. With four stages, plan at least one lesson per stage. Build usually needs the most time, so add lessons there before anywhere else.

Which SHAPE America standards should I cite?

Cite the standards your school or state requires, and add the SHAPE America standards if your form asks for them. The 2024 edition has four standards (S1–S4), while many forms still use the 2013 numbering with five (S1–S5). The codes differ between editions, so write the wording next to each code.

How do I write one unit plan for several grades?

Write one plan per grade span, such as Grades 3–4 and Grades 5–6, and keep the four stages the same. Change the conditions in the outcomes (distance, target size, number of attempts) and the rules of the final game. That keeps the plans comparable while each grade has outcomes it can reach.

What does a substitute need from a unit plan?

A substitute needs the equipment, safety, and differentiation rows plus the lesson plan for that day. The unit plan tells them which rules apply to the equipment and what the class has already learned, and the lesson plan tells them what to do today. Put both in one folder, and share accommodations the way your school requires.

Check your unit plan against a finished unit

Open the 3 free units without an account and compare each field with your own plan. The app for iOS & Android offers the Yearly plan and the 12-month plan with a 7-day free trial; see current prices in the app.

App for iPhone, iPad and Android.

Kid cheering with a ball in hand